We have made these Delrin bottom plates but have found that the alignment is off on the tabs for the fram and one side for the skid holes are off. With an exacto and or a file and some creative retooling, you can have a nice flexable bottom plate that not only absorbs shock, but has a servo tray built in. The hole are pretapped for the use of a 2mm machinned screw. I'm offering these as is for minimal cost. $2.00 pus shippiping to recoup a bit of the cost. I have 14 left and we are in the process of finishing up the corrected bottom plate. ETA N/A at the moment. Here is the link
Thanks
This is a CME Hobbies machined Delrin Bottom Plate for the Trex 450 SE. Replaces Part number HS1124.
Prtotype Needs rework
